|
|
Beam bridge over a local road
Kunčarová, Edita ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of this thesis is to design a one-span pre-stressed bridge structure over a local road. There are three possible versions of this particular construction designed as a part of this thesis, one of which was chosen for further design. The structure has been designed and calculated for the ultimate limit state as well as the service limit state. The calculations were made both by software and manually. Scia Engineer 19.1 has been used for software calculations and for the display of internal forces.
|
|
|
Prestressed girder bridge
Páteček, Tomáš ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
The thesis deals with the design of a new bridge construction at the place of an existing bridge on the road II/39 between the villages of Dobrkovice and Kájov over the river Polečnice. Three studies were developed as a solution. The chosen variant contains the construction of a prestressed girder bridge, simply supported, with a length of bridging 27,464 m. The category of the transferred road is S9,5, a body of transferred road is on both sides of the bridge in the embankment.
|
|
|
Bridge on a ramp
Páteček, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The object of this diploma thesis is the design and review of a bridge on a ramp. The bridge is part of a junction between the expressway R35 and the highway D1. Three case studies were made. The bridge construction is solved as continuous beam with six spans. The resulting design was made of prestressed concrete according to valid standards. The gradual construction was taken into consideration.
|
|
|
Girder bridge over the Blanice River
Kostka, Vojtěch ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Bachelor thesis is dealing with a design of the road bridge on the road III/14 130 in Zábrdí. Bridge leads over the river Blanice. There are three possible variants in preliminary desing. Study no.1 - Girder bridge is developed in detail. Solution of bachelor thesis includes statical analysis, drawing documentation and visualisation.
|
|
|
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
|
|
|
Diagnostics of Reinforced Concrete Bridge
Rozbroj, Lukáš ; Anton, Ondřej (referee) ; Cikrle, Petr (advisor)
This thesis contains diagnostics of a reinforced concrete girder bridge in the municipality of Újezd u Brna. The aim is to conduct an inspection of the bridge, gather quality photo-documentation of defects and failures and design and conduct a diagnostic examination of such extent that would be necessary for judging the load bearing capacity of the bridge. The result of this thesis is the determined load bearing capacity and a proposal of measures required to keep the bridge functional.
|
|
| |
|
|
Reconstruction of a beam bridge
Otevřel, Rostislav ; Klusáček,, Ladislav (referee) ; Nečas, Radim (advisor)
The work deals with the calculation of current carrying capacity of the bridge girder structure according to ČSN 73 6222 and the proposal for a new bridge. The bridge is used to transfer local roads across the river Svratka. The bridge is designed as a plate full cross-section, simply placed with a length of 13,174 m. The communication category is S 7.5. Loads and assessment are done according to Eurocode.
|
|
|
Design of a railway beam bridge
Jedlička, Martin ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of this bachelor thesis is to design a monorail concrete bridge. Focus will be put to design several preliminary versions of a girder bridge. There will be chosen one variant which will be examined more. I will make an assessment and comparison of this variant from concrete and prestressed concrete. As a result of this assessment I will choose the variant which is more convenient and make drawings documentation. The bridge is situated nearby city of Velké Pavlovice in the South Moravia. The rail is a monorail number 255 from Hodonín to Zaječí. The bridge goes over the Trkmanka brook. Calculation of inner forces is made in SCIA Engineer 2012 program. Design is made according EC standarts.
|
|
|
Bridge over the Bělá river
Kubíček, Ondřej ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Bachelor thesis is a dealing of the road bridge on the road I/44 over the Bělá river. There are three possible variants in preliminary design. The selected variant was dual girder concrete bridge to be developed in detail. A calculation has been done by hand, part of the thesis has been performed using Scia Engineer. The construction has been considered according to Eurocode. Solution of bachelor thesis includes statical analysis, drawing documentation and visualisation.
|
guest ::
